High ±2% Accuracy
No moving parts to stick or fail
Stores Tank Name and Tank Shape data
Tank depths from 200mm to 2 Metres
Up to 16 Fresh Water senders on a single network
Low Top Profile easy to install
Single plug to NMEA2000® bus
Part No Description
3281-F500 Fresh Water Sender - 500mm
3281-F1000 Fresh Water Sender - 1000mm
3281-F1500 Fresh Water Sender - 1500mm
3281-F2000 Fresh Water Sender - 2000mm
The 3281W NMEA2000 Fresh Water Level Sender will provide a ±2% accurate fresh water tank level to the NMEA2000 marine network and reports it's level in 1% increments.
It is robustly constructed in stainless steel with no moving parts to stick or fail in service. It is easily cut to length to suit tank depths from 200mm to 2 metres and is self calibrating at power on.
The Tank Sender can store an alphanumeric Tank Name and Tank Shape Calibration data so that displays on the network can show the tank name and it's remaining capacity in Litres, US Gallons or in Gallons.
It is easily fitted in the fresh water tank into a 1.25" BSP threaded hole. It can also be attached to the industry standard SAE 5 bolt fitting by using the 5 Bolt to 1.25" BSP Mounting Ring supplied.
Up to 16 Fresh Water Tank Level Senders can be connected to a single network and the sender number is simply selectable at installation by means of the small rotary switch.
It will be certified to the NMEA2000 network standard and attaches to the network using a single "Micro" plug. It draws less than 50mA from the network.
It comes complete with a full installation and operation manual, tank gasket and combined power and signal cable. It takes power from the NMEA2000 network and requires no additional wiring.